Fierastrau cu banda de precizie Pegas
9.603,49 RON
Costurile de livrare nu sunt incluse
Descriere
- Detalii si caracteristici.
- Carcasa din fonta pentru stabilitate si fiabilitate.
- Roti echilibrate din aluminiu pentru evitarea vibratiilor.
- Motor cu doua viteze.
- Garda pentru lama.
- Un sistem de siguranta asigura ca masina nu va functiona decat cand usile sunt inchise.
- Masa din fonta cu inclinatie la 40°, este acoperita cu un strat antiuzura.
- Sistemul de aspirare plasat direct sub masa pentru a elimina rapid rumegusul. cy
- Echipamentul este certificat CE de catre TœV Rheinland
Masina proiectata in Elvetia si produsa in Taiwan sub specificatii stricte.
Date tehnice:
- Greutate - 70 kg
- Putere motor - 550 W
- Port extractie rumegus - 58 / 65 mm
- Grosime maxima de taiere - 150 mm
- Adancime maxima de taiere fara ghidaj - 330 mm
- Marime masa prelucrare - 406 x 406 mm
- Inaltime masa - 1045 mm
- inclinare masa - 0-40 °
- Diametru roata - ¸ 353 mm
- Lungime banda fierastrau - 2375 mm
- Latime banda fierastrau min./max. - 1 / 3 mm
- Viteza banda fierastrau - 700 / 1050 m/min
- Dimensiuni totala fara suport - 525 x 580 x 700 mm
Sistemul de ghidaj a lamelor PGAS® PRECISION GUIDING SYSTEM
Sistemul de ghidaj Pegas® este necesar daca se folosesc panzele Pegas® pentru ca sunt foarte fine si au nevoie de sustinere corecta.
Ghidajele de sus si cele de jos sunt prelucrate pe CNC din bucati de aluminiu si au rulment. Santurile prelucrate ghideaza corect panza pentru a putea realiza
taieri precise, taieri curbe stranse.
Rolele cu rulment furnizate cu masina au doua santuri de dimensiuni diferite, unul pt lama nr. 9 si altul pentru cea de nr. 12
Alte role sunt oferite optional:
Alte role sunt oferite optional:
- 92.000-5 Rola pentru panzele Nr. 5
- 92.000-7 Rola pentru panzele Nr. 7
- 92.000-9 Rola pentru panzele Nr. 9
- 92.000-11/12 Rola pentru panzele Nr.11 si 12.
- 92.000-14 Rola pentru panzele Nr.14.
Masina se livreaza impreuna cu:
- 1x panza #9 + 1x panza #12
- Rolele de ghidaj de sus si de jos impreuna cu rulmenti pentru panzele de #9 si #12.
- Un stand de 580mm inaltime cu baza de 525 x 575mm
- Sistem iluminare cu LED
- Manual cu instructiuni in 4 limbi D/F/GB/SP
.
The precision band saw from Pegas is a global innovation which works with the finest and most precise saw blades that have ever been made. This unique development is dedicated to both hobbyists and professional users in the woodworking industry.
The heart of the machine is a specially developed roller guide system that is perfectly adapted to the Pegas fine-cutting saw blades. The guide consists of one roll bearing above and one roll bearing below the machine table that contains a guiding groove which is adapted to the respective fine-cutting saw blade.
The extremely slender fine-cut saw blade with a width of only 1.02 to 3 mm is guided perfectly without any twisting, enabling even the finest cuts with complicated shapes and the narrowest radius of less than 2 mm. The special tooth design avoids vibrations completely and provides for a high cutting performance with an incredible smooth finish of the edges. For soft and hardwood with a thickness of up to 150 mm.
Additional advantages:
The heart of the machine is a specially developed roller guide system that is perfectly adapted to the Pegas fine-cutting saw blades. The guide consists of one roll bearing above and one roll bearing below the machine table that contains a guiding groove which is adapted to the respective fine-cutting saw blade.
The extremely slender fine-cut saw blade with a width of only 1.02 to 3 mm is guided perfectly without any twisting, enabling even the finest cuts with complicated shapes and the narrowest radius of less than 2 mm. The special tooth design avoids vibrations completely and provides for a high cutting performance with an incredible smooth finish of the edges. For soft and hardwood with a thickness of up to 150 mm.
Additional advantages:
- Machine table working height 106.5 cm (optionally adjusted to 78.5 cm for seated working position - Replacement feet No. 716063)
- Machine frame and table made of warp-resistant cast iron, lower frame and roller coverings made of sheet steel
- Machine table can be tilted up to 40° and has a wear-resistant coating with increased sliding ability
- Two speed levels
- Safety switch in both doors prevents the machine from being turned on with the door open
- Balanced track rollers made of aluminium covered with replaceable rubber bands
- Diameter 65/58 mm connecting pieces for optimum dust extraction
- High dead weight, approx. 70 kg, for vibration-free operation
- CE-Certified by TœV Rheinland
Scope of delivery
- Lower frame, height 58 cm, base surface area 525 x 575 mm
- Integrated LED light with gooseneck
- Two roller guides with two different guiding grooves. Suited for fine-cutting saw blades No. 9 / 12 (Nr. 716066 / 716068)
- Two saw blades (respectively 1x No. 9 and No. 12)
- Instructions in German, English and French
- Weight 70 kg
- Motor 550 W
- Dust extraction outlet 58 / 65 mm
- Max. depth of cut 150 mm
- Max. width of cut without fence 330 mm
- Table size 406 x 406 mm
- Table height 1045 mm
- Table tilt 0-40 °
- Wheel ¸ 353 mm
- Blade length 2375 mm
- Blade width min./max. 1 / 3 mm
- Blade speed 700 / 1050 m/min
- Overall dimensions 525 x 580 x 700 mm (without base)
Ce spun clientii
Detii sau ai utilizat produsul?
Posteaza review